Differences

This shows you the differences between two versions of the page.

--- en:lenscatalog:version070000:usage:lensranges [2017/05/30 14:11] – created nicole.backmann
+++ en:lenscatalog:version070000:usage:lensranges [2017/05/31 09:48] (current) – nicole.backmann
@@ Line 1: / Line 1: @@
+[[en:lenscatalog:version070000:usage|Overview usage]]
+====== lens range ======
+Lens ranges will be handeled with IDs. Therefore recurring ranges need to be set only once and will be linked via the ID.
+Lens ranges can now be set with a validity date.
+{{en:lenscatalog:version070000:images:b2bcataloglensrange.png?nolink|B2BCatalogLensRange}}
+==== diameter and decentration ====
+== 1) standard diameter (no variable decentration possible) ==
+Diameters will be set with **physical** and optional with an **optical** diameter. \\
+{{en:lenscatalog:version070000:images:b2bcatalogdiameter.png?nolink|B2BCatalogDiameter}}
+If more than one diameter have the identical powerrange it is not necessary to set all diameters. The largest diameter can be set in the **B2BCatalogDiameter** section and the smallest diameter with the identical powerrange needs to be set in the **B2BCatalogDiameterSteps** section. With **catalogStep** the standard catalog step that does not require a surcharge will be set.
+{{en:lenscatalog:version070000:images:b2bcatalogdiametersteps.png?nolink|B2BCatalogDiameterSteps}}
+Example:
+a lens is available from +6 to -6dpt with the standard diameters 60/65,65/70,70/75 and 75/80 and a standard horizontal decentration of 2,5 mm. The diameters would be set as following:
+**diameter physical**: 75 \\
+**diameter optical**:80 \\
+**minDiameter physical**: 60 \\
+**catalogStep**: 5
+and for the **decentration**:
+**in min** : 2.5 \\
+**in max** : 2.5
+**up min** : 0 \\
+**up max** : 0
+== 2) Smaller diameter steps are available (but still no variable decentration) ==
+If there are smaller steps between the standard steps available they would be set with **specialDiameterStep**.
+{{en:lenscatalog:version070000:images:b2bcatalogdiametersteps.png?nolink|B2BCatalogDiameterSteps}}
+Example as mentioned but additionally with **specialDiameterStep**: 1
+This means that also the following diameters are also available:
+/66, 62/67, 63/68, 64/69 and so on.
+== 3) Variable decentration is available ==
+If a variable decentration is possible the diameter that are available will change again, according to the available decentration.
+{{en:lenscatalog:version070000:images:b2bcataloginuprangedecentration.png?nolink|B2BCatalogInUpRangeDecentration}}
+Example:
+**decentration**
+**in min** : 0 \\
+**in max** :  5
+**up min** : 0 \\
+**up max** : 0
+The list can now be extended to:
+/60,60/61,60/62 up to 60/70, this needs in case to be combined with the special diameter step and/or an upset in the decentration and can therefore become a very high amount of possible diameters.
+== 4) How to set and handle a surcharge for non-standard diameters ==
+If a surcharge for deviating diameters should be collected an option with the price for deviating diameters with the optionType **specialDiameter** and the [[en:lenscatalog:version070000:simpletypes:b2bcatalogspecialdiametertypes|specialDiameterTypes]] with value **specialDiameterStep** must be set. Often smaller diameters in the plus power range are without surcharge. This will be set with the lens in the **B2BCatalogIncludedFeatures** section. If there is the **B2BCatalogSpecialDiameterIncl** with the value **Only_smaller_for_plus** the surcharge should not be calculated for lensranges higher than +0.01dpt.