wiki.b2bOptic.com

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== OptionsPrice.Dat ======

===== Description =====

The "OptionsPrice.Dat" file contains the various prices of extras defined in the Options.Dat file.

\\
\\
\\

===== Table structure =====

^ No ^ Field name ^ Pos ^ Length ^ Format ^ Comments ^
|1*|Man. code coating|1|6|T6| |
|2*|Man. code base lens|7|6|T6|Specify a lens IT code if the price of the coating for a certain lens deviates from the standard price. Otherwise empty.|
|3*|Spherical / toric|13|1|9|0=unimportant \\ 1=spherical \\ 2=toric|
|4*|Single vision / multifocals|14|1|9|0=unimportant \\ 1=single vision base lens \\ 2=multifocal base lens|
|5*|For glass|15|1|B|
|6*|For plastic|16|1|B|
|7*|For polycarbonate|17|1|B|
|8*|For Trivex|18|1|B|
|9|Price 1|19|7|9999999|For definition, see Head.Dat|
|10|Price 2|26|7|9999999|For definition, see Head.Dat|
|11|Price 3|33|7|9999999|For definition, see Head.Dat|
|12|Price 4|40|7|9999999|For definition, see Head.Dat|
|13|Price 5|47|7|9999999|For definition, see Head.Dat|

===== Notes =====

The man. code “coating” must either be defined in Options.Dat or belong to one of the following, predefined groups.

===== Higher cylinder powers =====

For higher cylinder powers, the IT codes Z1, Z2, and Z3 are pre-defined. The price allocated to these IT codes must be added to the lens price if the cylinder exceeds the value in the cylindergroup-base in the Head.Dat file. (See note on the Head.Dat file). 

„Z1“ = (cylinder > cylindergroup-base) and (cylinder <= cylindergroup-1) \\
„Z2“ = (cylinder > cylindergroup-1) and (cylinder <= cylindergroup-2) \\
„Z3“ = (cylinder > cylindergroup-2) and (cylinder <= cylindergroup-3) \\


===== Prismatic powers =====

For prismatic powers, the IT codes P1, P2, P3, P4, P5 and P6 are pre-defined. The price allocated to these IT codes must be added to the lens price if the lens has a prismatic power.

„P1“ = (prism > 0) and (prism <=prismgroup-1) \\
„P2“ = (prism > prismgroup-1) and (prism <=prismgroup-2) \\
„P3“ = (prism > prismgroup-2) and (prism <=prismgroup-3) \\
„P4“ = (prism > prismgroup-3) and (prism <=prismgroup-4) \\
„P5“ = (prism > prismgroup-4) and (prism <=prismgroup-5) \\
„P6“ = (prism > prismgroup-5) \\