Differences

This shows you the differences between two versions of the page.

--- en:lenscatalog:version061002:lenstype.dat [2014/04/30 12:37] – created justinvomberg
+++ en:lenscatalog:version061002:lenstype.dat [2016/10/26 13:39] (current) – larabernau
@@ Line 1: / Line 1: @@
+====== LensType.Dat ======
+===== Description =====
+The LensType.Dat file contains all deliverable base lenses.
+\\ \\ \\ \\ \\ \\ \\ \\ \\ \\
+===== Table structure =====
+^N. ^Fieldname ^Pos ^Length ^Format ^Comments ^
+|1*|Man. code base lens|1|6|T6| |
+|2|Designation|7|40|T40|The designation must be clear and must not be used for several IT codes.|
+|3|Deliverable from|47|8|D|Empty = only limited by "deliverable up until"|
+|4|Deliverable up until|55|8|D|Empty = no expiry date|
+|5|Single vision / multifocals|63|1|9|0=single vision \\ 1=bifocals \\ 2=trifocals \\ 3=progressive lenses \\ 4=Workstation / office lens|
+|6|Balancing lens|64|1|9|0 = No balancing lens available for this lens. \\ 1 = A balancing lens is available for this lens.|
+|7|Balancing lens, lens terms|65|3|999|Balancing lens costs approx. xxx % of the original price|
+|8|Balancing lens, coating terms|68|3|999|Coating of balancing lens costs approx. xxx % of the original price|
+|9|Standard/ brand|71|1|9|0=standard \\ 1=brand \\ 2=Eco |
+|10|Material|72|1|9|1=glass \\ 2=plastic \\ 3=polycarbonate \\ 4=Trivex© |
+|11|Refractive index|73|5|99999|9.9999|
+|12|Density (specific gravity)|78|3|999|9.99 g/cm³|
+|13|Abbe no.|81|4|9999|99.99|
+|14|Aspheric lens|85|1|9|0=spherical \\ 1=aspheric \\ 2=biaspherical \\ 3=freeform|
+|15|Lenticular lens|86|1|B| |
+|16|ET contained|87|1|9|0=no ET \\ 2=single ET \\ 5=multiple ET \\ 8=Super ET \\ 9=back surface ET |
+|17|Colors contained|88|1|9|0=no color \\ 1=filter<15% absorption \\ 2=colored|
+|18|Photochromic|89|1|B| |
+|19|Hard coating incl.|90|1|ISNEWSF061002 9|0=keine Hartschicht \\ 1 = Hart \\ ISNEWSF061002 2 = Superhart|
+|20|Clean coating incl.|91|1|9|0=no \\ 1=normal Clean \\ 2=Super Clean|
+|21|UV coating|92|1|B| |
+|22|Coating incl.|93|1|B| |
+|23|MDM incl.|94|1|B| |
+|24|non-standard diameters incl.|95|1|9|0=no \\ 1=yes \\ 2=smaller or central diameters in the plus range at no extra charge|
+|25|Non-standard thickness incl.|96|1|B| |
+|26|Insurance incl.|97|1|B| |
+|27|Prism incl.|98|1|B|1 means that there is no extra charge for the prism in the complete, deliverable power range|
+|28|Filter category|99|1|9|0 to 4 acc. to DIN EN ISO 8930-3|
+|29|Restrictions in traffic|100|1|9|See Traffic suitability|
+|30|UV cut-off|101|3|999|999nm|
+|31|UV-A transmission|104|4|9999|99,99%|
+|32|UV-B transmission|108|4|9999|99,99%|
+|33|Extended warranty|112|1|B| |
+|34|Single lens order|113|1|9|0=not possible \\ 1=possible \\ 2=with fictive opposite lens|
+|35|Traveller service|114|1|B| |
+|36|Sorting|115|3|999|ascending number sorting acc. to manufacturer's instructions|
+|37|Brief designation|118|15|T15|Brief designation of the lens|
+|38|N.A.|133|2|99|Field was removed|
+|39|N.A.|135|2|99|Field was removed|
+|40|Exposed filter category|137|1|9|0 to 4 acc. to DIN EN ISO 8930-3 Value for exposed status of photochromic lenses|
+|41|Office lens Addition/Power decrease|138|1|9|0=no specification required \\ 1=specify distance + addition \\ 2=specify near + power decrease|
+|42|Polarising|139|1|B| |
+|43|Contrast-enhancing|140|1|B| |
+|44|Principal meridian check incl. Add.|141|1|B|1= to check the principal meridian, the near value (Sph. + Add.) if a lens is used. (See remarks) This field is also used for price determination (See remarks)|
+|45|Optimised wavefront incl.|142|1|B| |
+|46|ISNEWSF061002 blueLightFilter inkl.|143|1|B| |
+===== Notes =====
+**Important**:
+==== The allocation of the numbers to the colors has changed. ====
+This is now valid:\\
+=glass\\
+=plastic\\
+=polycarbonate\\
+=Trivex©
+SF4 had the following definition which is no longer valid: \\
+=glass\\
+=plastic \\
+=composite \\
+=polycarbonate
+The new allocation was made to ensure that the numbers for the material are identical for the lenses and the coatings. (Note: Material as such no longer exists in the Options.Dat file. However, the allocation of numbers has remained in the new version)
+==== Hard coating incl.”, “Clean coating incl.” ====
+The fields "Hard coating incl.", Clean coating incl.", etc. are assigned with value 1 if these extras are supplied automatically, i.e. if no IT code for the option/coating is transferred with the electronic order.
+==== Principal Meridian check incl. Add. ====
+If this field has the value “True”, the near value of the lens (SPH + ADD) has to be used for checking the power range.
+Example:
+<code>
+Delivery range PM -4.00 bis +4.00
+Sph -4.75 Add. 0,50 --> KO (-4,25)
+Sph -4.50 Add. 0,50 --> OK (-4,00)
+Sph -4.25 Add. 0,50 --> OK (-3,75)
+Sph -4.75 Add. 0,75 --> OK (-4,00)
+Sph -4.50 Add. 0,75 --> OK (-3,75)
+Sph -4.25 Add. 0,75 --> OK (-3,50)
+Sph +3.25 Add. 0,50 --> OK (+3,75)
+Sph +3.50 Add. 0,50 --> OK (+4,00)
+Sph +3.75 Add. 0,50 --> KO (+4,25)
+Sph +3.25 Add. 0,75 --> OK (+4,00)
+Sph +3.50 Add. 0,75 --> KO (+4,25)
+Sph +3.75 Add. 0,75 --> KO (+4,50)
+</code>
+==== Price determination for Principal Meridian check incl. Add. ====
+If the field has the value „true“, then the near value (sph+add) is used for pricing.
+Example:
+<code>
+The following price groups exist:2, 4, 6
+Sph: +3,75 Add:0,5 → The lens is in price group 6, da +3,75 +0,5 = 4,25 (Near value)
+Sph: -2,25 Add:0,5 → The lens is in price group 2, da -2,25 +0,5 = -1,75 (Near value)
+</code>